 |
ARNBS-8KW
ALLRUN
Component
1)High quality low frequency pure sine wave inverter(with utility charge
function and UPS function)
2)Built-in PWM solar power charge controller
Application
1)Off-grid solar power system
2) Utility and solar complementary power generation system
Features
1) Easy to install. To configure a solar system, users just need to connect it with solar panels and batteries.
2)CPU management,Intelligent control,modular design
3)LEDs LCD display. LCD can display various parameters(such as the output voltage, frequency, working mode)
4)Multifunction design, AVR UPS function. Users don’t need to buy solar, controller, AC charger or stabilizer.
5) External battery connection, it’s convenient for users to expand use time and back-up power time
6)With super load-carrying ability and high load capacity, this series of inverters can not only drive resistance load; but also various kinds of inductive loads such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp. It can drive almost any kinds of load
7)Low frequency pure sine wave circuit design, stable quality, easy to maintenance, low failure rate and long service life (under proper operation, it can last at least 20 years)
8) Perfect protection: low voltage protection, high voltage protection, over temperature protection, short-circuit protection, overload protection
9) CE / EMC / LVD/ RoHS /FCC standard
10) 5 years warranty, life-long technical support
Parameter
Mode | 12KVA | ||
Rated Output Capacity | 8KW | ||
Peak Power | 8KW | ||
Battery Voltage(DC) | 96V | ||
PWM Solar Controller | Voltage | 96V | |
Current | 120A | ||
PV Max Input Voltage | 200V | ||
Size W×D×H(mm) | 550*300*700 | ||
Packing Size W×D×H(mm) | 600*350*790 | ||
Net Weight (kg) | 75 | ||
Gross Weight (kg) | 85 | ||
General Parameter | |||
Working Mode (Setting) | 1 | Utility first (AC first) battery standby mode | |
2 | Battery first (DC first)utility standby mode | ||
AC Input | Voltage | 220V±35% or 110V+35%（Optional） | |
Frequency | 50Hz±3% or 60Hz±3% （Optional） | ||
AC Output | Voltage | 220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional) | |
Frequency | 50Hz±0.5 or 60Hz±0.5 (Optional) | ||
Utility charge | AC Charge Current | 0~15A | |
Charge Time | Depend on battery capacity and quantity | ||
Battery Protection | Automatic detection, Charge and discharge protection，Intelligent Management | ||
PV Charge | Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller | ||
Display | Display Mode | LCD+LED | |
Display Information | Input voltage，output voltage，output frequency，battery capacity，Load condition，Status Information | ||
Output Wave Type | Pure sine wave output,Total Harmonic Distortion THD≤3 | ||
Overload Ability | ＞120% 1 min，＞130% 10s | ||
Power Consumption | Sleep Mode | 1~6W | |
Normal Mode | 1~3A | ||
Conversion Efficiency | 80%~90% | ||
Transfer Time | ＜5ms （AC to DC / DC to AC） | ||
Protection | Overload output，short-circuit，high-voltage input，low-voltage input，overheat | ||
Environment | Temperature | -10℃～50℃ | |
Humidity | 10%～90% | ||
Altitude | ≤4000m | ||
² The “optional” parameter can be set as per customer’s requirement
² The above is our standard parameter. Subject to change without prior notice.
²
We have our own professional inverter and controller R&D team and we provide technical support and OEM service.
Component
1)High quality low frequency pure sine wave inverter(with utility charge
function and UPS function)
2)Built-in PWM solar power charge controller
Application
1)Off-grid solar power system
2) Utility and solar complementary power generation system
Features
1) Easy to install. To configure a solar system, users just need to connect it with solar panels and batteries.
2)CPU management,Intelligent control,modular design
3)LEDs LCD display. LCD can display various parameters(such as the output voltage, frequency, working mode)
4)Multifunction design, AVR UPS function. Users don’t need to buy solar, controller, AC charger or stabilizer.
5) External battery connection, it’s convenient for users to expand use time and back-up power time
6)With super load-carrying ability and high load capacity, this series of inverters can not only drive resistance load; but also various kinds of inductive loads such as motor, air conditioner, electric drills, fluorescent lamp, gas lamp. It can drive almost any kinds of load
7)Low frequency pure sine wave circuit design, stable quality, easy to maintenance, low failure rate and long service life (under proper operation, it can last at least 20 years)
8) Perfect protection: low voltage protection, high voltage protection, over temperature protection, short-circuit protection, overload protection
9) CE / EMC / LVD/ RoHS /FCC standard
10) 5 years warranty, life-long technical support
Parameter
Mode | 12KVA | ||
Rated Output Capacity | 8KW | ||
Peak Power | 8KW | ||
Battery Voltage(DC) | 96V | ||
PWM Solar Controller | Voltage | 96V | |
Current | 120A | ||
PV Max Input Voltage | 200V | ||
Size W×D×H(mm) | 550*300*700 | ||
Packing Size W×D×H(mm) | 600*350*790 | ||
Net Weight (kg) | 75 | ||
Gross Weight (kg) | 85 | ||
General Parameter | |||
Working Mode (Setting) | 1 | Utility first (AC first) battery standby mode | |
2 | Battery first (DC first)utility standby mode | ||
AC Input | Voltage | 220V±35% or 110V+35%（Optional） | |
Frequency | 50Hz±3% or 60Hz±3% （Optional） | ||
AC Output | Voltage | 220V±3% or 230V±3 or240V±3% or 100V±3% or 110V±3% (Optional) | |
Frequency | 50Hz±0.5 or 60Hz±0.5 (Optional) | ||
Utility charge | AC Charge Current | 0~15A | |
Charge Time | Depend on battery capacity and quantity | ||
Battery Protection | Automatic detection, Charge and discharge protection，Intelligent Management | ||
PV Charge | Total Current of PV Input Should Be Less Than Rated Current of PWM solar controller | ||
Display | Display Mode | LCD+LED | |
Display Information | Input voltage，output voltage，output frequency，battery capacity，Load condition，Status Information | ||
Output Wave Type | Pure sine wave output,Total Harmonic Distortion THD≤3 | ||
Overload Ability | ＞120% 1 min，＞130% 10s | ||
Power Consumption | Sleep Mode | 1~6W | |
Normal Mode | 1~3A | ||
Conversion Efficiency | 80%~90% | ||
Transfer Time | ＜5ms （AC to DC / DC to AC） | ||
Protection | Overload output，short-circuit，high-voltage input，low-voltage input，overheat | ||
Environment | Temperature | -10℃～50℃ | |
Humidity | 10%～90% | ||
Altitude | ≤4000m | ||
² The “optional” parameter can be set as per customer’s requirement
² The above is our standard parameter. Subject to change without prior notice.
²
We have our own professional inverter and controller R&D team and we provide technical support and OEM service.
