 |
| Quantity: | |
|---|---|
ARPMG-10KW
ALLRUN
1. Production Presentation:
1. NdFeB, rare earth permanent magnet generator
2. low start-up torque, SKF bearing
3. small size, beautiful appearance, low vibration
4. easy installation, maintenance and repair.
5. permanent magnet generator rotor using patented alternator, together with the special stator design, effectively reduce the generation of resistance torque
2. Production Parameter
Rated power (kW) | 10kW |
Rated speed (rpm) | 150rpm |
Rated torque (Nm): | 636.6Nm |
Rated voltage (V): | 220VAC（ can adjust） |
Rated current (A): | 26A |
Startup torque (Nm) | <12.7Nm |
Phase number | 3-phase |
Frequency (Hz) | 50Hz |
Pairs of Poles | 12 |
Insulation Class: | H |
Protection Class | IP54 |
Efficiency（﹥%） | 94% |
Cooling | Forced Air cooling |
Mechanical specifications | |
Installation | Horizontal |
Frame size | Y225 |
Weight (Kg) | 300kg |
Materials | |
Shaft material | Steel |
Bearings | SKF |
Housing material | Casting Iron |
Winding material | Copper |
Winding temperature level | 180℃ |
Magnet | NdFeB |
Magnet temperature level | 150℃ |
Core | Cold rolled silicon steel sheet |
1. Production Presentation:
1. NdFeB, rare earth permanent magnet generator
2. low start-up torque, SKF bearing
3. small size, beautiful appearance, low vibration
4. easy installation, maintenance and repair.
5. permanent magnet generator rotor using patented alternator, together with the special stator design, effectively reduce the generation of resistance torque
2. Production Parameter
Rated power (kW) | 10kW |
Rated speed (rpm) | 150rpm |
Rated torque (Nm): | 636.6Nm |
Rated voltage (V): | 220VAC（ can adjust） |
Rated current (A): | 26A |
Startup torque (Nm) | <12.7Nm |
Phase number | 3-phase |
Frequency (Hz) | 50Hz |
Pairs of Poles | 12 |
Insulation Class: | H |
Protection Class | IP54 |
Efficiency（﹥%） | 94% |
Cooling | Forced Air cooling |
Mechanical specifications | |
Installation | Horizontal |
Frame size | Y225 |
Weight (Kg) | 300kg |
Materials | |
Shaft material | Steel |
Bearings | SKF |
Housing material | Casting Iron |
Winding material | Copper |
Winding temperature level | 180℃ |
Magnet | NdFeB |
Magnet temperature level | 150℃ |
Core | Cold rolled silicon steel sheet |
