Three Phase 50KW To 200KW on Grid Inverter for Wind Turbine System
You are here: Home » Products » Inverter » On Grid Inverter » On Grid Inverter for Wind Tuirbine System » Three Phase 50KW To 200KW on Grid Inverter for Wind Turbine System
Add : West Liaoyang Rd., Shibei Dist., Qingdao, Shandong, China
Tel : +86 532 85650065
Phone : +86 13153225739
E-mail : allrun@qdallrun.com
Whatsapp : +86 13153225739

PRODUCT DETAIL

loading

Share to:
sharethis sharing button

Three Phase 50KW To 200KW on Grid Inverter for Wind Turbine System

Size:
Availability:
Quantity:
  • ARNBOW50K

  • ALLRUN

Using IGBT from Mitsubishi company as the power components
◆ Using American ATEMEL company microprocessor as figure controller
◆ Perfect protection and warning functions
◆ Wind turbine MPPT technology
real-time tracing wind turbine max. output power
◆ Disturbance detection technology, anti-island control
◆ Circuit frame compact, Max. Efficiency≥94%
◆ Outdoor stainless steel shell, fully sealed installation
◆ Input voltage within the broad, the maximum reach 1150VDC
◆ With RS485/RS232, Ethernet, GPRS (optional) interfaces, remote data collection and surveillance
◆ Pure sine wave output, automatic synchronization grid connected, non-polluting to the power grid, no impact
◆ Inverting current close-cycle control, power to control and adjustable
◆ Touch screen , perfect display, interface-friendly 

On grid wind turbine inverter

ARNBOW50K

ARNBOW100K

ARNBOW200K

Rated output power (AC)

50KW

100KW

200KW

Max. Output power (AC)

55KW

110KW

220KW

Input voltage rang (DC)

0-800V

0-800V

0-800V

MPPT Voltage range (DC)(DC)

150V-700V

150V-700V

150V-700V

Max. Input current (DC)

114.6A

229A

458.3A

Rated current

104A

208A

416.7A

THD Current harmonic

<3%(at rated power)

Power factor

>0.99

Max. efficiency

96%

Allowable grid voltage range (AC)

220V/380V/440V/480V (Three-phase)±20%

Allowable grid frequency range

50Hz/60Hz±10%

Automatic operation conditions

DC input and power grid meet the   requirements, and the inverter operates automatically

Restart time after power failure

2min(Adjustable)

General parameters

Function

Rectification, DC output, output voltage control, output current   control, Dump load control, control parameter setting, wind turbine curve   setting

Automatic protection

Control part: Over voltage protection, over current protection, reverse   connection protection, lightning arrester

Inverter part: Polarity reverse connection protection, short circuit   protection, island effect protection, LVRT、overheat   protection, overload protection, ground fault protection, etc

Display

Touch screen, LCD

Monitoring content

Wind turbine voltage, current, power, solar panel voltage, current,   power, DC output voltage, current, power, inverter output power, * cumulative   power generation, * power generation at any time, * rotational speed, * wind   speed

Protection level

IP20(Indoor)IP65   (Outdoors)

Telematics

RS485/USB/GPRS/WIFI/Ethernet (optional)

Environment

Operating amb. Temp. & Hum    -30-60°C,<90%   no condensation

Noise (1m)

<40dB

Refrigeration mode

Forced air cooling


Controller size / weight

500*500*900mm   56kg

600*500*1200mm    107kg

950*550*1700mm    150kg

Dump load size / weight

920*770*380mm   80kg

920*770*380mm*2   150kg    

923*739*510mm*4   280kg

Inverter size / weight

750*600*1320mm  340kg

1460*860*1820mm   1.4t

1460*860*1820mm   1.6t








 

*Above parameter only for reference. Could be custom made to user specifications.


Previous: 
Next: 
Home
Add: West Liaoyang Rd., Shibei Dist., Qingdao, Shandong, China    Tel: +86 532 85650065 
Phone: +86 13153225739    Email: allrun@qdallrun.com
Copyright  Qingdao Allrun New Energy Co., Ltd. All rights reserved.