 |
ARNBOW-10k
ALLRUN
◆ Using IGBT from Mitsubishi company as the power components
◆ Using American ATEMEL company microprocessor as figure controller
◆ Perfect protection and warning functions
◆ Wind turbine MPPT technology， real-time tracing wind turbine max. output power
◆ Disturbance detection technology, anti-island control
◆ Circuit frame compact, Max. Efficiency≥94%
◆ Outdoor stainless steel shell, fully sealed installation
◆ Input voltage within the broad, the maximum reach 1150VDC
◆ With RS485/RS232, Ethernet, GPRS (optional) interfaces, remote data collection and surveillance
◆ Pure sine wave output, automatic synchronization grid connected, non-polluting to the power grid, no impact
◆ Inverting current close-cycle control, power to control and adjustable
◆ Touch screen , perfect display, interface-friendly
Type | ARNBOW-10KWS |
Nominal capacity | 10KW |
Rated AC output power | 10KW |
Max. AC output power | 11KW |
Recommended Wind Turbine Voltage | AC380V |
Max. dc open circuit voltage | 780Vdc |
MPPT range | 150～700Vdc |
MPPT power curve | Can be set |
Display | Touch screen |
Rated DC Input Current | 21A |
Max. DC Input current | 23A |
THD of AC current | <3% （nominal power） |
Power factor | >0.99 |
Max. Efficiency | 98% |
Allow the grid voltage range | 220V/380V/440V/480V (Three-phase)±20% |
Nominal AC frequency | 50Hz/60Hz±10% |
Automatically put into operation | When the DC input and power grids meet to the requirements, the inverters automated operation |
Auto restart time after cut off | 5min(time adjustment) |
Protection | Input short voltage, over voltage, connecting contrary, output over current, short circuit, over heat etc. |
Communication interface | RS485/RS232/GPRS/WIFI/Ethernet (optional) |
Work environment temperature | -10℃～+55℃ |
Relative humidity | 0~95% no condensing |
Applicable altitude | ≤2000 m Higher than 2000m rated power should be reduced |
Cooling method | Controlled forced-air cool |
Noise (1m) | ≤50dB |
Degree of protection | IP20 |
Size(W*L*H) mm | 690*275*770 |
Weight(kg) | 90 |
◆ Using IGBT from Mitsubishi company as the power components
◆ Using American ATEMEL company microprocessor as figure controller
◆ Perfect protection and warning functions
◆ Wind turbine MPPT technology， real-time tracing wind turbine max. output power
◆ Disturbance detection technology, anti-island control
◆ Circuit frame compact, Max. Efficiency≥94%
◆ Outdoor stainless steel shell, fully sealed installation
◆ Input voltage within the broad, the maximum reach 1150VDC
◆ With RS485/RS232, Ethernet, GPRS (optional) interfaces, remote data collection and surveillance
◆ Pure sine wave output, automatic synchronization grid connected, non-polluting to the power grid, no impact
◆ Inverting current close-cycle control, power to control and adjustable
◆ Touch screen , perfect display, interface-friendly
Type | ARNBOW-10KWS |
Nominal capacity | 10KW |
Rated AC output power | 10KW |
Max. AC output power | 11KW |
Recommended Wind Turbine Voltage | AC380V |
Max. dc open circuit voltage | 780Vdc |
MPPT range | 150～700Vdc |
MPPT power curve | Can be set |
Display | Touch screen |
Rated DC Input Current | 21A |
Max. DC Input current | 23A |
THD of AC current | <3% （nominal power） |
Power factor | >0.99 |
Max. Efficiency | 98% |
Allow the grid voltage range | 220V/380V/440V/480V (Three-phase)±20% |
Nominal AC frequency | 50Hz/60Hz±10% |
Automatically put into operation | When the DC input and power grids meet to the requirements, the inverters automated operation |
Auto restart time after cut off | 5min(time adjustment) |
Protection | Input short voltage, over voltage, connecting contrary, output over current, short circuit, over heat etc. |
Communication interface | RS485/RS232/GPRS/WIFI/Ethernet (optional) |
Work environment temperature | -10℃～+55℃ |
Relative humidity | 0~95% no condensing |
Applicable altitude | ≤2000 m Higher than 2000m rated power should be reduced |
Cooling method | Controlled forced-air cool |
Noise (1m) | ≤50dB |
Degree of protection | IP20 |
Size(W*L*H) mm | 690*275*770 |
Weight(kg) | 90 |
